Hi All In this blog, we will look at configuring Juniper routers via Opendaylight which in turn uses netconf/restconf for making the connection. Before we can start doing the configuration we need to create a Netconf connector between Opendaylight and Juniper routers. Also before that let’s first see what NETCONF is 🙂 Network Configuration Protocol …

Continue reading

Hi All Let’s see Segment routing in action in this blog particularly on IOS-XR. Segment routing is quite new concept which is picking pace these days. In my earlier blog I listed the differences between Segment routing and RSVP-TE and SR can replace it and there are certain areas where it may not be able …

Continue reading

Hi All In this post, we will look at Open day light controller working with Juniper vMXs and how we can use the controller to get the BGP, BGP-LS and PCEP working. Once everything is up and running we will use the Controller to initiate the PCEP initiated MPLS LSPs between 2 VMXs. Sounds interesting? …

Continue reading

Hi All, in this session lets discuss some Automation. During past few days, I was looking at some REST APIs for Juniper Northstar Controller. Now Northstar is good for LSP creation/deletion/modification but it cant configure the service E2E. Offcourse that tool is not meant to do all this but Juniper has recently released one beta …

Continue reading